Brother TD-2020A User Manual page 30

Chapter 3
IPv6
• Static IPv6 Address
Specifies a permanent IPv6 address.
• Enable this address
Enables the specified static IPv6 address.
• Primary DNS Server IPv6 Address/
Secondary DNS Server IPv6 Address
Specifies the DNS server IPv6 addresses.
• IPv6 Address List
Displays the list of IPv6 addresses.
Wired 802.1x Authentication
Configures IEEE 802.1x authentication.
• Wired 802.1x Status
Enable or disable IEEE 802.1x authentication
for wired networks.
• Authentication Method
Select the authentication method.
• User ID/Password
Specify these settings only when EAP-FAST,
PEAP, EAP-TTLS, or EAP-TLS is selected as
the authentication method. In addition, with
EAP-TLS, it is not necessary to register a
password, but a client certificate must be
registered. To register a certificate, connect to
the printer from a web browser, and then
specify the certificate. Installation of the
authentication certificate can also be
performed with the Printer Setting Tool by
going to the menu bar: File > Install
Certificates.
Wireless Settings
• Communication Mode
Displays the available communications modes.
• SSID (Network Name)
Clicking Search displays the available SSIDs
in a separate dialog box.
• Channel
Displays the automatically selected channel.
• Authentication Method/Encryption Mode
The supported encryption modes for the
authentication methods are shown in the table
below.
24
Authentication
3
Method
Open System
Shared Key
WPA3-SAE
WPA/WPA2-PSK/
WPA3-SAE
EAP-FAST/NONE
EAP-FAST/
3
MS-CHAPv2
EAP-FAST/GTC
PEAP/MS-CHAPv2
PEAP/GTC
EAP-TTLS/CHAP
EAP-TTLS/MS-CHAP
EAP-TTLS/MS-
CHAPv2
EAP-TTLS/PAP
EAP-TLS
3
Encryption Mode
None
WEP
WEP
AES
TKIP + AES
AES
TKIP
AES
TKIP
AES
TKIP
AES
TKIP
AES
TKIP
AES
TKIP
AES
TKIP
AES
TKIP
AES
TKIP
AES
TKIP
AES