Using The Rj25 To Db9M Serial Adapter (Optional:pa-Sca-001); Connecting The Computer And Printer With The Rj25 To Db9M Serial Adapter; Product Specifications - Brother TD-2020A User Manual

Using the RJ25 to DB9M Serial
9
Adapter (Optional:PA-SCA-001)
Connecting the
Computer and Printer
With the RJ25 to DB9M
Serial Adapter
Be sure to use the cable designed for
your Brother optional product.
a
Before connecting the serial cable,
make sure that the printer and the
computer are turned off.
b
Connect the RJ25 side of the adapter to
the printer.
c
Connect the printer end of the serial
cable to the DB9M side of this adapter.
d
Connect the other end of the serial cable
to the serial port on the computer.
NOTE
• The default communication settings are
as follows:
Baud rate: 9600bps
Parity: None
Bit length: 8 bits
Flow control: Hardware
• To change the communication settings,
use [P-touch Template settings] in the
"Printer Setting Tool" - [Communication
settings]. For more information, see the
P-touch Template Command Reference.
The latest versions can be downloaded
from the support website.
support.brother.com
Select the product, and then select
[Manuals].
62

Product Specifications

Converts to a D-sub 9-pin male connector.
9
1 RJ25 to DB9M serial adapter
9
9
1