Table of Contents
Advertisement
Chapter 3
Advanced Printing Adjustments
Dialog Box
1
2
3
4
5
1 Printing Reference Point Adjustment
Adjust the position of the reference point (point
of origin for printing). This corrects printing
misalignments resulting from differences in
printer models or from the fixed margins of
some applications.
2 Tear Adjust
Adjust the cutting position when the paper is
cut using the tear bar.
Available settings: -10.0 mm to 10.0 mm
3 Energy Rank
Select a setting when it is necessary to adjust
the amount of heat (energy) from the print
head, for example, with special paper.
NOTE
There may be contrast variations in the print
result due to the operating environment and
media used. Change the setting if necessary.
4 Media Sensor (Transmissive/Gap)
Adjust the precision with which the
transmissive/gap sensor detects the gaps
(spacing) for die-cut labels and the amount of
light emitted by the sensor.
Settings can be specified when [Paper Types]
is set to [Die-cut Label].
40
3
6
7
NOTE
Since the settings for [Media Sensor
(Transmissive/Gap)] (page 30) in the [Device
settings] dialog box will have an effect, specify
appropriate values.
Example of the settings:
Device settings
Paper Size Setup
Actual effect
5 Media Sensor (Reflective/Bar)
Adjust the precision with which the reflective/
black mark sensor detects black marks and the
amount of light emitted by the sensor.
Settings can be specified when [Paper Types]
is set to [Media With Marks].
NOTE
Since the settings for [Media Sensor
(Reflective/Bar)] (page 30) in the [Device
settings] dialog box will have an effect, specify
appropriate values.
Example of the settings:
Device settings
Paper Size Setup
Actual effect
6 OK
Saves the settings and returns to the [New]
dialog box.
7 Cancel
Cancels the settings and closes the dialog box.
The settings will remain unchanged.
Setting
Setting
EX1
EX2
2
-2
2
2
4
0
Setting
Setting
EX1
EX2
2
-2
2
2
4
0
Advertisement
Table of Contents
