Rfa Gen; Timing Mode; Figure 5-2. Network Timed Clock Source - ADTRAN ESU LT User Manual

RFA Gen

Timing Mode

44
When enabled, remote frame alarm is transmitted toward the
network during alarm.
Choices: E
NABLE
Selects the clock source for transmission toward the network from
the NI.
Choices: N
ETWORK
The clocking option selected always designates the clock source
for transmission. Clocking necessary for receiving data is always
recovered from incoming data.
Network Timing
The network is the source of timing. The received data clocking is
looped back to the network, where it is used to determine the
transmission timing. This option is also referred to as looped timed
as the transmission clock is derived from the received clock. See
Figure 5-2.
ESU LT User Manual
; D
ISABLE
; I ; DTE
NTERNAL

Figure 5-2. Network Timed Clock Source

Chapter 5. Configuration Menu
61200410L2-1A