Control Panel - Atlas Copco ZT 55 Instruction Book

3.2

Control panel

Elektronikon regulator
Parts and functions
Reference
1
2
3
4
5
6
7
7
8
9
S2
26
Designation
Start button
Display
Scroll keys
Tabulator key
Function keys
Voltage on LED
General alarm LED
General alarm LED
Automatic operation LED
Stop button
Emergency stop button
Control panel
Function
Button to start the compressor. LED (8) lights up
indicating that the Elektronikon regulator is operative.
Shows messages about the compressor operating
condition, a service need or a fault.
Keys to scroll upwards or downwards through the
display.
Key to select the parameter indicated by the horizontal
arrow. Only the parameters followed by an arrow
pointing to the right can be modified.
Keys to control and program the compressor.
Indicates that the voltage is switched on.
Is lit if a shut-down warning condition exists or
maintenance is required.
Flashes if a shut-down condition exists, if an important
sensor is out of order or after an emergency stop.
Indicates that the regulator is automatically controlling
the compressor.
Button to stop the compressor. LED (8) goes out.
Push button to stop the compressor immediately in the
event of an emergency. After remedying the trouble,
unlock the button by pulling it out.
Instruction book
APFS998935v00