VeEX MX100 Series E-Manual page 90

MX100/120 e-Manual D07-00-004 Rev A04
Go back to top
8.5.3.1 Setup
Select the VoIP tab to proceed with the IP Phone setup.
Profile - Recall an existing or save a new profile
Mode - Select IP Phone from the Mode pull down menu.
Protocol - SIP and H.323 are the only protocols supported at this time.
Registration - Direct or Peer to Peer.
Username and Password - for registering with the call authentication server
Codec - select between G.711A, G.711U, G.728 or G.729
Headphone - When the user turns on the headphone selection, an information box appears prompting you to plug-in the
VeEX USB headphone adaptor. Ensure the headphone USB adapter is properly connected to the test set before pressing
'OK'
VoIP Call Expert setup
Go back to top
8.5.3.2 Registration Status
The status will show the registration progress and call activity if any
Once the test set has completed the registration, the test set status will change to Online.
If the test set fails to register, repeat the setup process and ensure all the parameters are entered correctly and register
again.
VoIP Call Expert - USB Warning
Page 90 of 115