Panasonic CS-Z25YKEA Service Manual page 64

Hide thumbs Also See for CS-Z25YKEA:
Table of Contents

Advertisement

Model
Z50***, Z71***
1
Pull down 3 caps at the bottom, then remove
3 mounting screws.
2
Open front panel.
3
Remove 3 mounting screws on the front grille.
4
Slide the 4 lock knobs on the upside of front
grille to unlock position
5
Pull the front grille towards you to remove the
front grille.
12.3.8
Disposal of Outdoor Unit Drain Water
If a drain elbow is used, the unit should be placed on a stand which is taller than 3 cm.
If the unit is used in an area where temperature falls below 0°C for 2 or 3 days in succession, it is recommended
not to use a drain elbow, for the drain water freezes and the fan will not rotate.
12.3.9
How to Replace Network Adapter
Remove the front grille (refer how to take out front grille) from the unit.
Remove the indicator piece by releasing the hook.
Remove 1 mounting screw, then remove the network adaptor holder.
After that, network adaptor can be easily replaced.
2
12.3.10 Check the Drainage
Open front panel and remove air filters.
(Drainage checking can be carried out without
removing the front grille.)
Pour a glass of water into the drain tray-styrofoam.
Ensure that water flows out from drain hose of the
indoor unit.
6
Drain elbow
Install the hose at an angle so that the water
smoothly fl ows out.
3
Indicator
piece
Hook
Screw
64
Cap and Screw
1
Front panel
(3 location)
2
Hose
4
Network adaptor
holder
LOCK
4
UNLOCK
Lock knob
5
Front grille
3
Screw
(3 location)
Drain tray-styrofoam

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents