17.2 Breakdown Self Diagnosis Function
17.2.1
Self Diagnosis Function (Three Digits Alphanumeric Code)
Once abnormality has occurred during operation, the unit will stop its operation, and Timer LED blinks.
Although Timer LED goes off when power supply is turned off, if the unit is operated under a breakdown
condition, the LED will light up again.
In operation after breakdown repair, the Timer LED will no more blink.
17.2.2
To Make a Diagnosis
1
Timer LED start to blink and the unit automatically stops the operation.
2
Select System check from remote controller Main menu.
Entering method
Case 1: During Operation ON
120