Table of Contents
Advertisement
If connection is successful, the following pop-up window will appear:
If connection is unsuccessful, either one of the three pop-up window will appear:
1. Connection with both
units failed
Please ensure that both CNT cables are connected properly at indoor unit and wired remote controller
according to CNT cable Installation Manual. After that, repeat Steps 1. to 5. (Contact an authorised dealer if
problem persists).
6. After connection is successful, press
Duty Rotation icon
operation.
The operation setting for Duty rotation mode will follow the previous setting saved before operation OFF.
14.13.2 Setting change during Duty Rotation
Setting change is prohibited during Duty Rotation. Attempting to change setting or pressing
following pop-up window:
Press
to close the pop-up window.
2. Connection with main
unit failed only
to close the pop-up window. After returning to Operation Screen,
should appear on the Top left corner. This icon will appear throughout Duty Rotation
106
3. Connection with sub
unit failed only
will result in the
Hide quick links:
Advertisement
Table of Contents
