Bartec Tech200 User Manual page 5

CORRECT USE OF THE TECH200 TOOL
In order to use the TECH200 safely:
• Do not expose the TECH200 to excessive moisture.
• Do not use the TECH200 near sources of heat or polluting emissions (stoves, ovens, etc.).
• Do not drop the TECH200.
• Do not allow the TECH200 to come into contact with water or other liquids.
• Do not open the TECH200 or attempt to perform maintenance or repair operations on any internal parts.
• You are advised to keep the packaging and to re-use it if the TECH200 is moved to another site.
When using the TECH200 remember:
•
Do not subject the TECH200 to magnetic or electric interference.
Kit Components
The TECH200 kit includes:
• TECH200 activation tool
• Wall plug – power supply
• USB cable
Indentifying Kit Components and Features
The TECH200 Tester is battery operated [rechargeable] and generates a low-frequency magnetic field to activate tire
sensors. It receives UHF radio signals from the tire sensors typically at 315 MHz.
A
D
B
A Display Screen
C Mini USB Port
E Power Supply
B
C
B Up/Down Navigation Keys
D Select/Power Button
F USB Cable
E
F
5