Vivo STAND-V002D Instruction Manual

Dual monitor desk mount

Dual Monito Monitor Desk M Desk Mount Mount

Instruction Manual

Model Monito : STAND- STAND V002D

Email: help@vivo-us.com

Live chat: www.vivo-us.com

Call: 1-800-371-5654

Scan the QR code with your mobile device or follow the link

to helpful videos and specifications related to this product.

https: STAND- / /vivo us.com/pr Desk M o ducts/stand v002d

Tool Monito s Requir Desk M e d: STAND-

phillips screwdriver

Pack Mount a ge Contents

A (x1)

E (x1)

D (x1)

H (x5)

I (x1)

M A (x4)

M4x12

B (x1)

C (x1)

F (x1)

G (x1)

J (x1)

K (x1)

4mm

5mm

M B (x4)

M C (x4)

M5x12

Table of Contents

Need help?

Do you have a question about the STAND-V002D and is the answer not in the manual?

Page 1 Scan the QR code with your mobile device or follow the link to helpful videos and specifications related to this product. https: STAND- / /vivo us.com/pr Desk M o ducts/stand v002d Tool Monito s Requir Desk M e d: STAND-...
Page 2 Assembl Monito y Steps Steps Step 1 (Continued) Step 1 1a 4 1a 1 Tighten the clamp to the desktop Install the clamp base support (B) onto the base using the plastic knob. of the monitor stand (A) with bolts (H) using provided 4mm Allen wrench (J).
Page 3 Step 2 Step 4 Remove cables covers as shown from upper and lower arms. Insert screws (M-A or M-B) with washers (C) into top two holes of monitor, leaving 3mm of thread exposed. Hang monitor over slots in VESA plates. Secure monitor with screws and washers in bottom two holes and tighten top screws.
Page 4 Call: 1-800-371-5654 If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product. For more VIVO products, check out our website at www.vivo-us.com. Last updated: 04/27/18...