Table of Contents
Advertisement
positive overtravel appears.
5. Select appropriate Software Limit Position Settings
a. Negative Limit in Software End Limit Positions panel means the software limit position in negative
direction.
b. Positive Limit in Software End Limit Positions panel means the software limit position in positive direction.
Function Testing Window
In the Function Testing Window, the user can test most functions of the DMC5400 except the functions which
have array variables.
1. Function List
Function List Panel shows most API functions of the DMC5400 to help user to program.
2. Current Function
Current Function Panel shows the function that the user selected or the closest function that match the user enters.
3. Current Function Prompts
Current Function Prompts Panel shows the prompts for the current function.
4. Program List
Program List shows the current program, and the user can edit the program in this panel. The user can run the
program when finish programming or stop a running program with the button on the Main Toolbar.
Refer to "Software Manual for the DMC5400 Motion Controller Motion Controller" for more information
about API functions of the DMC5400.
Tel: +086 0755-26434369
Figure 6.7: Function Testing Window
Email: sales@leadshine.com
Page: 30/36
Hardware Manual for the DMC5400 Motion Controller
Web Site: www.leadshine.com
Advertisement
Table of Contents
