Page 1
Improper installation will void the warranty. Notice to Installer This manual contains important information about the installation, operation and safe use of this product. Once the product has been installed this manual must be given to the owner/ operator of this equipment. www.waterco.com...
IMPORTANT SAFETY INSTRUCTIONS When installing and using this equipment, basic safety precautions should always be followed, including the following: READ AND FOLLOW ALL INSTRUCTIONS To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times.
Waterco Fulflo Cartridge Filters I pg 02 Equipment that is incorrectly pressure tested may fail, causing severe injury or property damage. Pressure testing should only be conducted by trained pool/spa professionals. Chemical fumes and spills can weaken pool/spa equipment. Corrosion can cause pumps, filters and other equipment to fail, resulting in severe injury or property damage.
INSTALLATION 1. Check carton and filter components for damage. If anything is damaged, notify the carrier immediately. 2. Wrap one to two turns of Teflon tape around the thread of the pressure gauge. Screw the pressure gauge into the threaded hole on the tank. 3.
Speak to your local pool professional or contact Waterco. 5. Replace the cartridge(s), caps and spacer. 6. Replace the tank top ensuring the o ring is seated correctly.
TROUBLE SHOOTING The list below contains the more common problems that can occur with this equipment. If you cannot identify the fault from the list below, consult Waterco or your local pool professional.
Need help?
Do you have a question about the FULFLO P200 and is the answer not in the manual?
Questions and answers