Changing The Name And Symbol Of A Zone - DeDietrich EASYLIFE CFU 36 F30 User Manual

Fig.17
1
6.6.2

Changing the name and symbol of a zone

The names and symbols of the various zones are factory-configured. It is possible to personalise the name and symbol for the
installation zones.
1. Go to the menu: Zones settings.
Tab.31
Type of access
Direct access: from the main home screen
Quick access: from any screen
2. Select the required zone:
Zone1
Zone2 (only if the optional PCB is connected)
3. Select General.
4. Select Zone friendly Name.
5. Enter the new name for the zone (maximum 20 characters) and confirm with OK.
7740570 - v04 - 03112022
1
2
All the zone symbols and names can be changed.
Tab.29
Symbol
2
MW-1001145-2
Tab.30
Symbol
Access path
Not available
→ Press the
→ Select:
→ Select: Zones settings
Zone1
Zone2 (only if the optional PCB is connected)
Available symbols
Symbol Symbol allocation
value
0 None
1 All
2 Bedroom
3 Livingroom
4 Study
5 Outdoor
6 Kitchen
7 Basement
Symbols available (only if the optional PCB is connected)
Symbol Symbol allocation
value
8 Swimming Pool
9 DHW Tank
10 DHW Electrical Tank
11 DHW Layered Tank
12 Internal Boiler Tank
13 Time Program
key
User settings
6 Settings
CFU 23