Changing The Room Temperature Of A Zone; Definition Of Zone; Changing The Name And Symbol Of A Zone - DeDietrich LN1GBQ41-C140-45 User Manual

Menu
Programmes horaires pour le chauffage
Configuration de zone
Tab.6 Extended menu to configure a heating circuit Configuration de zone
Menu
Dérogation de température
Mode Fct Circ
ConsAmb Circ Manuel
Mode vacances
Zone friendly Name
Icon display zone
5.5

Changing the room temperature of a zone

5.5.1

Definition of zone

Fig.8 Two zones
5.5.2

Changing the name and symbol of a zone

7745361 - v03 - 29112021
Function
Set and configure the time programs used when in operating mode
Programmation.
Configure the settings of the zone circuit.
Function
Change the room temperature temporarily, if required.
Select the heating operating mode: Scheduling, Manual.
Set the room temperature manually to a fixed setting.
Set the start and end date of your holiday and the reduced temperature for
this zone.
Create or change the name of the heating circuit.
Select the icon of the heating circuit.
The maximum heating water temperature can be set at 7-90°C.
The water temperature of the low-temperature heating system should not
be higher than 60°C.
Zone is the term given to the different hydraulic circuits CIRCA, CIRCB
and so on. It designates several areas of a building served by the same
circuit.
Tab.7 Example of two zones
Zone
1 Zone 1
2 Zone 2
2
1
AD-3001404-01
The zones have a factory symbol and factory name. You can change the
name and symbol of a zone.
1. Select the tile of the zone you want to change.
2. Press the
3. Use the rotary knob to select
4. Press the
5. Use the rotary knob to select Zone friendly Name
6. Press the
A keyboard with letters, numbers and symbols is shown.
Factory name
CIRCA
CIRCB
button to confirm the selection.
Zone configuration
button to confirm the selection.
button to confirm the selection.
DIEMATIC Evolution - C140
5 Settings
15