Empty And Clean The Bean Hoppers (And Powder Chute (Machine Option)); Clean The Housing - Eversys LEGACY L'2c/Classic User Manual

Care
1. Switch off [63] at the main power switch.
2. Gently pull down (1) to remove the coffee outlet.
3. Clean with soft soap under clean water (2).
4. Gently reassemble in the reverse order.
Single
7.3.4. Empty and clean the bean hoppers (and powder chute (machine
option))
1. Switch off [63] at the main power switch.
2. Remove the bean hopper lids (1).
3. Unlock the bean hoppers (2) (Closed position).
4. Remove the bean hoppers (3) and store the beans for re-use.
5. Clean the bean hoppers (4) with soft soap, rinse with water and dry with a soft cloth.
6. Reassemble in the reverse order and lock the bean hoppers (5) (Open position).
7. Fill the coffee bean hoppers
Make sure that the bean hoppers are perfectly dry before refilling with coffee
beans.

7.3.5. Clean the housing

1. Switch off [63] at the main power switch.
2. Clean the housing with a damp cloth.
Page 93 of 161
Double
[54].
Close
Open
Published on 29.06.2022 Legacy User Manual © Eversys S.A.