Everfoam Tm And Auto Foam Products; Hot Water Products - Eversys LEGACY L'2c/Classic User Manual

Settings Menu
1. Key Name, press to type in a new name (maximum 13 characters).
2. Key Icon, press to select another product picture.
3. Water Quantity, press to modify the number of ticks or seconds (adjust with the slider or up/
down keys).
4. Learn Quantity:
a. Press Learn Quantity to dispense a coffee.
b. When the desired level is in the cup, press the same button to stop the drink. This memorises
the number of ticks (or seconds).
5. Browse to the next menu.
6. Press one of the line under the Milk sequence to open available settings (only for milk products
and if you have a fridge).
7. Press the line under the Powder sequence to open available settings (only for powder products
and if you have a choco module or a powder unit).
8. Milk Quantity (only for milk products and if you have a fridge), press to modify the numbers of
seconds or Learn Quantity.
9. Water Quantity (only for powder products and if you have a choco module or a powder unit),
press to modify the quantity (in ml).
10. Product test
Ensure that at least 6 beverages are run using Product Test to achieve the desired coffee and
extraction time and that the grinder is delivering the correct amount of coffee for the set cake
thickness.
To adjust see Bean & Grinder menu
TM
6.4.1. Everfoam
With these steam products it is possible to control the Stop Temperature and Foam Texture.

6.4.2. Hot water products

With hot water products it is possible to control the Water Quantity and Water Temperature.
Page 73 of 161
[78].
and auto foam products
Published on 29.06.2022 Legacy User Manual © Eversys S.A.