Strata ADVANCEMULTI205P Operating Instructions Manual page 47

In the SAVE interface, press the left button to
back, rotate the knob to select the unstored
parameter group, press the right button to
save the parameters.
LOAD
1. In the function selection interface, press
the right button to enter the LOAD interface,
shown
47
ADVANCEMULTI205P
below:
www.strata.co.nz
In the LOAD interface, press the left button
to back, rotate the knob to select and view the
stored parameter group, press the right button
to enter the welding interface,
2. In the welding interface, long press the
right button to enter the LOAD interface,
shown below:
In the LOAD interface, press the left button
to back, rotate the knob to select and view the
stored parameter group, press the right button
to enter the welding interface,