Configuration Utility - Linksys WPC11 User Manual

Network pc card instant wireless series
Hide thumbs Also See for WPC11:
Table of Contents

Advertisement

6. RT S T h re s h o l d s h o u l d
remain Disabled as set by
default. Do not change the
setting
of
the
RTS
Threshold unless connection
quality
is
poor.
Then,
increase this setting by the
smallest value first to estab-
lish a better connection.
7. Fragmentation Threshold
should remain Disabled as
set by default. Do not
change the setting of the
Fragmentation Threshold
unless connection quality is
poor. Then, increase this set-
ting by the smallest value
first to establish a better con-
nection.
50
Instant Wireless
TM
Series
Network PC Card
8. Under Power Saving mode,
select either "Enabled" or
"Disabled." "Disabled" will
allow for uninterrupted data
communication. Selecting
"Enabled" allows your note-
book to enter "sleep" mode
and could interrupt data
communication. For further
information about Power
Save Mode, see the chapter
entitled
Configuration
Utility.
9. Select either Disabled, 64
bit, or 128 bit as the value
under Encryption. Wired
Equivalent Privacy (WEP) is
an encryption scheme used
to protect wireless data com-
munication. The Disabled
setting prevents the sharing
of data with other computers
on a WEP network. For data
sharing to be enabled, select
either 64 or 128 bit encryp-
tion, depending on your
needs.
51

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wpc11 v2.5

Table of Contents