Linksys WPC54A Quick Installation

This Quick Installation is meant to help you install the product quickly and easily. For detailed instructions on installation
and configuration and further setup options, please consult the User Guide.
Instant Wireless™ Series
WPC54A
W W i i r r e e l l e e s s s s
System Requirements
P P C C C C a a r r d d
• Pentium-Class 200MHz or Faster Processor
• 64MB RAM Recommended
• One Available Type II or Type III PCMCIA
CardBus Slot
• One CD-ROM Drive
• Windows XP
• 5 Mb of free disk space for utility and
driver installation
Package Contents
• One Wireless PC Card (IEEE 802.11a) (1)
• One Setup CD-ROM with User Guide (2)
• One Quick Installation Guide
• One Registration Card
2
Installing the Wireless PC Card
Note: Make sure to install the Wireless PC Card before you install the
the drivers.
A. Locate an available Type II or Type III PCMCIA CardBus slot on your
notebook computer.
B. With the Wireless PC Card's 68-pin connector facing the PCMCIA
CardBus slot and the "Wireless PC Card" label facing up, as shown
below, slide the Wireless PC Card completely into the PCMCIA CardBus
slot.
After attaching the Wireless PC Card to your computer, you will install
the network drivers.
1 B
Installing the Wireless PC Card
Driver
Important for Windows XP users: Do NOT automatically
run the Wireless Wireless PC Card Setup Wizard. If the Setup
Wizard runs automatically after the Setup Wizard CD has been
inserted, click the Exit tab.
A. Windows XP will automatically detect the presence of the Wireless
Wireless PC Card in your computer. Insert the Setup Wizard CD into
your CD-ROM Drive. Click the radio button next to Install from a list
or specific location (Advanced). Then click the Next button to continue.
A
B. Click the radio button next to Search for the best driver in these loca-
tions. Only select Include this location in the search:, and enter
D:\Drivers in the location field (if "D" is the letter of your CD-ROM
drive). Click the Next button.
.
B
Continued on back