Linksys WPC11 User Manual page 27

2. The IRQ Base level can be
changed in order to avoid
possible conflicts with other
system devices. The default
setting for the Wireless
Network PC Card is 7. This
value should only be
changed if the Card does
not work properly.
3. The Mode setting should be
either Infrastructure or Ad-
Hoc, depending upon your
network's settings. The
Infrastructure mode allows
a wireless adapter to com-
municate with a wired net-
work employing an Access
Point, while the Ad-Hoc
mode allows wireless-
to-wireless, peer-to-peer
communication. For more
information about these set-
tings, refer to the section
called Ad-Hoc versus
Infrastructure Mode.
48
Instant Wireless TM Series Network PC Card
4. The SSID depends on what
Mode is selected. If the
Mode is Infrastructure, it
should have the same SSID
name as the Access Point. If
the Mode is Ad-Hoc, all
clients should share the same
SSID name.
5. The DS Channel setting
must be the same for all
wireless points in the net-
work. Use the settings, 1-11,
to find the best channel for
your connection.
49