Linksys WPC11 User Manual page 14

14. After setting the Resource and Properties fields, Windows NT will begin
installing the network components you previously selected. You may be
asked if you would like to configure the protocols with a DHCP server on
your network. If this screen comes up, check with your Network
Administrator before clicking the Yes or No button to continue. This set-
ting may also be changed at a later time.
15. Now, the network components will finish installing. If a screen similar to
that shown here appears, be sure to check with your network administrator
before making ANY changes and then click the Next button to continue.
22
Instant Wireless TM Series Network PC Card
16. At this point, Windows NT will let you know that it is ready to start the
network. If you'd like to stop the procedure, click the Back button. To con-
tinue, click the Next button.
17. On this screen, you will enter your Computer Name, which is how your
computer will be identified on the network. You will also assign the com-
puter to either a Workgroup or Domain, whichever is appropriate. The
Computer Name must be different than any other on the Workgroup or
Domain. Click the Next button.
23