Installing The Configuration Utility For Windows Nt - Linksys WPC11 User Manual

Once the installation has completed, the following screen may appear,
depending on the configuration of your computer.
If the window does appear, make sure that the Instant Wireless Network PC
Card V2.5 appears in the Adapter window. Then, unless you need to assign a
static IP address, select Obtain an IP address from a DHCP server and
click the OK button. If you need to assign a static IP address, select Specify
an IP Address, and enter the appropriate values under IP Address, Gateway
Mask, and Default Gateway. After you have made your choice, click the
OK button.
Windows NT has now completed installing the drivers. Remove the Setup CD
from the CD-ROM drive and click the Finish button to continue. Then restart
your computer.
The Driver Installation is complete. Continue now to the section called

Installing the Configuration Utility for Windows NT.

28
Instant Wireless TM Series Network PC Card
Installing the Configuration Utility for Windows NT
Once you have restarted your computer, the drivers for the Card should load
successfully. Now it is necessary to install the Configuration Utility. Insert
the Setup CD in the CD-ROM drive. Unless you have deactivated the auto-
run feature of Windows, the following screen should appear automatically.
If this screen does not appear automatically, you can access the installation by
pressing the Start button and choosing Run. In the drop-down box provided,
type D:\setup.exe (where D: is the letter of your CD-ROM drive). Alternately,
double-click My Computer, and then double-click the CD-ROM drive where
the Setup CD is located. Double-click the Setup.exe icon that appears. Follow
the instructions that appear on your screen. If you have any questions or diffi-
culty, refer to the section called Installing the Drivers and Configuration
Utility for Windows 95, 98, ME, and 2000.
29