Installing The Drivers For Windows Nt - Linksys WPC11 User Manual

Installing the Drivers for Windows NT

Windows NT will set up the Network PC Card differently depending upon
whether you've previously installed network hardware or not. Please follow the
instructions appropriate for you.
If You Have Never Installed Network Hardware:
1. Windows NT is not a Plug-and-Play Operating System and will not auto-
matically identify the Network PC Card. To begin setup, insert the Setup
Utility CD into your CD-ROM drive. If the Setup Utility CD attempts to
autorun, exit out of the utility to the desktop. Then select Settings from the
Start Menu and bring up the Control Panel. Double-click the Network
icon.
2. Windows will notify you that Networking is not installed. Click the Yes but-
ton to continue.
16
Instant Wireless TM Series Network PC Card
3. Installation will begin and you will reach the screen shown below. You will
want to select the box that reads Wired to the network since you are adding
network hardware. Then click the Next button to continue.
4. The next screen will not show any Network Adapters installed on your sys-
tem; this signifies that no network hardware has been previously installed.
You will want to click the Select from list button to continue.
17