Advanced Properties For Windows Nt - Linksys WPC11 User Manual

13. The WEP Passphrase value allows the user to change the passphrase that
is used to generate the encryption key for WEP. Any alphanumeric value
can be entered here, but it will only be activated if you choose either 64 or
128 bit under Encryption. This value can also be changed using the
Configuration Utility. For further information, see the Configuration
Utility section of this guide.
Once your card is configured, click OK and continue to the Install Network
Protocols section.
46
Instant Wireless TM Series Network PC Card
The Advanced Properties for Windows NT
The Advanced Properties screen allows you to make modifications to your
Network PC Card, optimizing performance. These properties are accessed
by right-clicking on the Network Neighborhood icon on the desktop.
Select Properties from the menu that appears. A tabbed window will appear
next. Click the Adapters tab. Highlight the Instant Wireless Network PC
Card V2.5 and then click the Properties button. The following screen
should appear. Choosing improper settings in these fields can keep the
Wireless Network PC Card from functioning properly. Follow these steps to
configure the Advanced Properties fields:
1. The I/O Base setting should
be unique and not conflict
with any other device set-
tings in your system.
Note: In order to
check for potential
I R Q c o n f l i c t s , r u n
WINMSD by selecting
RUN from the Start
menu and typing win-
msd.exe and pressing
the Enter key.
47