Linksys WPC11 User Manual page 15

18. Once the drivers have been installed, the following screen may appear.
Make sure that the Instant Wireless Network PC Card V2.5 appears in the
Adapter window. Then, unless you need to assign a static IP address, select
Obtain an IP address from a DHCP server and click the OK button. If
you need to assign a static IP address, select Specify an IP Address, and
enter the appropriate values under IP Address, Gateway Mask, and Default
Gateway. After you have made your choice, click the OK button.
Windows NT has now completed installing the network. Remove the Setup
CD from the CD-ROM drive and click the Finish button to continue. Then
restart your computer.
The Driver Installation is complete. Continue now to the section called
Installing the Configuration Utility for Windows NT.
Note: After you have installed the Network PC Card, reapply
the Windows NT service pack.
24
Instant Wireless Series
TM
Network PC Card
If You Have Installed Network Hardware Before:
1. Windows NT is not a
Plug-and-Play Operating
System and will not
automatically identify
the Network PC Card. To
begin setup, insert the
Setup Utility CD into
your CD-ROM drive and
then select Settings from
the Start Menu. Bring
up the Control Panel.
Then double-click the
Network icon.
2. To add the Network PC Card,
you will want to click the
Adapters tab and then click
the Add button to continue.
25