Icon
Description
Push to show the Main menu.
Claros connection
WiFi connection. Shows when a USB
box with a WiFi adapter is connected
to the controller.
Screen lock. Shows when the screen
is locked.
screen.
When in a sub menu, push to go to
the main screen.
Figure 14 Devices screen
1 Device name: Push to show the device detail window.
Section 6 Startup
Connect the power cord to an electrical outlet with protective earth ground or set the circuit breaker
for the controller to on.
6.1 Enter initial settings
At initial startup, follow the prompts on the display to set up the language, the date, the time and
network information. Refer to
Section 7 Operation
7.1 Configure the controller settings
Set the controller language, time, date, facility, location and display options.
12
The Screen lock option is enabled by default.
22 English
Table 5 Icon descriptions
12
Swipe up to unlock the
Configure the controller settings
Icon
Description
3G/4G signal strength. Shows when a
USB box with a cellular modem is
connected to the controller.
USB connection. Shows when a USB
flash drive is connected to the
controller. Blinks when there is data
transmission.
Remote user. Shows when a remote
user is connected to the controller.
Push to enter a submenu or go back
to the previous menu.
on page 22 to change the settings.