4.3 DIMM Module Extension
TOP PREVIOUS NEXT
A maximum of 256 MB extended memory may be required depending on the combination of the
paper size, resolution and gray scale mode.
To determine how much extended memory is required, refer to the following page Additional
Memory Size each scanning mode (MB).
* Recommended DIMM
JEDEC-standard 168pin, dual in-line memory module (DIMM)
●
Non buffered
●
Single +3.3V±0.3V power supply
●
Frequency/ CAS Latency : 100MHz/CL=2, 133MHz/CL=2, 133MHz/CL=3
●
64MB, 128MB or 256MB may be used.
●
(Reference) DIMM module which has been evaluated using this scanner
Manufacturer: DELKIN DEVICES
●
1. Model No.: DM168-064Y3Q488-10S2P (64MB)
2. Model No.: DM168-064Y3Q446-10S2P (64MB)
3. Model No.: DM168-128Y3Q488-10S4P (128MB)
Note:
Originally, SCSI board has 16MB memory except for the above additional memory.
TOP PREVIOUS NEXT