Panasonic KV-S2065L Service Manual page 49
High speed scanner
Hide thumbs
Also See for KV-S2065L:
- Service manual (256 pages) ,
- Operating instructions manual (54 pages) ,
- Service manual (20 pages)
Table of Contents
Advertisement
7.4.1 Re-attachment of the Sensor Roller Assembly
TOP PREVIOUS NEXT
When the Sensor Roller is removed for cleaning the inside of the scanner, reattach it as shown below.
Lower Sensor Roller:
1. Attach the roller by placing the gear side to the left side of the scanner and inserting both sides bearings into the guide grooves.
Note:
After attaching, press down on top of the Sensor Roller with your finger to confirm if it moves or not.
Upper Sensor Roller:
1. Attach the roller by inserting the bearing of the gear side of the roller into the guide groove on the left side of the scanner.
Note:
Match the flat side of the bearing with the flat side of the guide groove.
2. Hold the shaft on the right side of the Sensor Roller, push the tip of the gear, and slide the Sensor Roller in the direction of the arrow
3. Attach the roller by inserting the bearing for the non-gears side of the roller into the guide groove on the right side of the scanner.
Note:
Match the flat side of the bearing with the flat side of the guide groove.
.
Advertisement
Table of Contents
