Disassemble and assemble which influence to
scanning positions.
EX) Disassemble and assemble of Sub Chassis (R),
(L), Main Chassis (R), (L)
Driver Roller
Conveyor Roller
TOP PREVIOUS NEXT
Adjust All Position & Length Automatically or 4 Adjustments should be done.
(1) Adjust Front H. Position Automatically
(2) Adjust Front V. Position Automatically
(3) Adjust Back H.Position Automatically
(4) Adjust Back V. Position Automatically
*When Adjust All Position & Length Automatically is done, Length is adjusted again.
Adjust All Position & Length Automatically or the following Adjustment should be done.
(1) Adjust Length Automatically