(16) Adjust Double Feed Detector
(17) Adjust Length
Automatically
(18) Adjust Front V. position
Automatically
(19) Adjust Front H. position
Automatically
(20) Adjust Back V. position
Automatically
(21) Adjust Back H. position
Automatically
(22) Adjust All position &
Length Automatically
(23) Adjust Shading
Push STOP/START key once.
(From Section 9.6)
8
Select a menu of Setting Item by
pushing "
" or "
Set paper on Scanner.
Push STOP/START key once.
Confirm the Test result.
Test again?
Yes
or
Do another Test?
No
Push HOME key once.
9
(To Section 9.6)
" key.
(16) Set Adjustment paper.
(17)-(22) Set Test chart A.
Note: (17) Front Side
(23) Set Shading paper.
Note: Part number of these charts or
(18) Front Side (*Set 2pcs of Test
chart on account of including
adjustment for the function of
"Sensor Delay automatically".
(19) Front Side
(20) Back Side
(21) Back Side
(22) Set 6 charts in following order
Front Side
1
Front Side
2
Front Side
3
Front Side
4
5
Back Side
6
Back Side
paper are shown on SECTION15.