Advertisement
Step 7 Test
Curtain switch: set the curtain status. (stop, open, close or percentage)
After testing, when the curtain opens or closes, casement is maybe extruded or the
opening position is wrong (the curtain has stopped even if it is not fully opening.) Now,
you should adjust the opening and closing position again by "Adjust ON/OFF".
Operation: Take the opening position as an example. At first, you should make sure the
opening position, control the curtain to close to the opening position. And then, select
"Open" (shown as above). If displays " command error", means the opening position has
confirmed. The closing position setting is same as the opening. General condition, the
closing position needn't set.
Professional Home and Building Automation
www.hdlautomation.com
Wireless curtain motor
HDL-MWM70-RF.12
Do you need help? Contact with us
support@hdlchina.com.cn
6/ 7
Advertisement
