Advertisement
Step 5
Testing for installation
Method one:
（1）Keep pressing the button for 5S, the LED will flash 1 time/2S, the curtain enters into the testing mode.
（2）The motor will measure moveable distance for the rail automatically (Open-close), when the motor stops,
finish.
（3）Short press the button, change the curtain status, if you press the button 1 time, the curtain will open, stop
or close.
（4）If it works properly, keep pressing the button for 5S, it will exit the testing mode.
Method two：
Click"Start", the motor will measure moveable distance for the rail automatically, when it stops, will
exit.
Step 6 Drag mode
No action
Drag mode: long drag, short drag, no action.
Long drag:
Draw the curtain, the curtain will fully open or close automatically, the default distance is 20cm.
Short drag:
Draw the curtain, the distance will be more than the safe distance and less than the short drag distance, the curtain will open or
close automatically，the default safe distance is 5cm，in order to avoid misoperation or curtain flap, you can set the safe distance. The
default distance is 20cm.
No action:
Free mode, end-user can manually drag the curtain to any position freely.
Note: Long drag and short drag are depend on your habit. When pulley is moving, the length should not less than 5cm, and no more than
the half of total length.
Professional Home and Building Automation
www.hdlautomation.com
Wireless curtain motor
HDL-MWM70-RF.12
Long drag
Short drag
Do you need help? Contact with us
support@hdlchina.com.cn
5/ 7
Advertisement
