Juniper ACX500 Hardware Manual page 140

4. Hold onto the bottom of the chassis, and carefully lift it so that the mounting brackets contact the
rack rails. See Figure 35 on page
WARNING: To prevent injury, keep your back straight and lift with your legs, not your
back. Avoid twisting your body as you lift. Balance the load evenly and be sure that
your footing is solid.
Figure 35: Installing the ACX500 Indoor Router in the Rack
5. Align the mounting brackets with the holes in the rack rails.
6. Install a mounting screw into each of the open mounting holes on the mounting bracket aligned with
the rack, starting from the bottom.
7. Visually inspect the alignment of the router. If the router is installed properly in the rack, all the
mounting screws on one side of the rack should be aligned with the mounting screws on the
opposite side, and the router should be level.
131.
131