Get Started - Instant Pot PRO PLUS User Manual

Get started

Initial set up
01 Pull that Instant Pot Pro Plus out of the box!
02 Remove the packaging material and accessories from in and around the multicooker
and make sure all the parts are accounted for. See Product, parts and accessories for
a full parts breakdown.
Make sure to check under the cooking pot!
03 Wash the cooking pot in a dishwasher or with hot water and dish soap. Rinse it well
with warm, clear water and use a soft cloth to thoroughly dry the outside of the
cooking pot.
04 Wipe the heating element with a soft, dry cloth to make sure there are no stray
packaging particles left in the multicooker base.
Don't remove the safety warning stickers from the lid (unless specified on the sticker!)
or the labels from the back of the multicooker base.
05 You may be tempted to put the Pro Plus on your stovetop — but don't do it! Place
the multicooker base on a stable, level surface, away from combustible material and
external heat sources.
Is something missing or damaged?
Get in touch with a Customer Care Advisor by email at UKsupport@instantbrands.com (if
located in the UK) or EUsupport@instantbrands.com (if located in the EU) and and we'll
happily make some magic happen for you!
Read the Important
safeguards before using
the appliance. Failure
to read and follow those
instructions for safe use
may result in damage to the
appliance, property damage
or personal injury.
CAUTION
DO NOT place
the appliance on a
stovetop or another
appliance. Heat from
an external source will
damage the appliance.
To avoid risk of property
damage and/or personal
injury, DO NOT place
anything on top of the
appliance, and DO NOT
cover or block the steam
release assembly or anti-
block shield, located on the
appliance lid.
instantbrands.co.uk | 11