Instant Pot PRO PLUS User Manual page 50

Troubleshooting
Problem
The display
Bad power connection or no
remains
power.
blank after
connecting the
The multiooker's electrical fuse
power cord.
has blown.
C1
C3
C4
C6
C7
C8
C10
Error code
appears on the
Lid
display and the
multicooker
beeps
continuously.
Alt
Food
burn
PrSE
Any other servicing must be performed by an authorised representative.
50 | instantbrands.co.uk | +44 (0) 3331 230051
Possible reason
Faulty sensor.
Heat element has failed.
Not enough liquid.
Incorrect cooking pot
is used.
Wifi error.
The lid is not in the
correct position for the
selected programme.
The target temperature
for safe canning was
not reached.
High temperature
was detected at the
bottom of the cooking
pot; the multicooker
automatically reduces
the temperature to
avoid overheating.
Pressure has
accumulated during a
non-pressure cooking
Smart Programme.
Check outlet to make sure it is powered.
Inspect power cord for damage. If you notice damage,
contact Customer Care.
Contact Customer Care.
Contact Customer Care.
Contact Customer Care.
Add thin, water-based liquid to the cooking pot according
to its size.
500 mL
Only use a stainless-steel Pro Series cooking pot with easy
grip handles with the Pro Plus.
Contact Customer Care.
Open and close the lid.
Do not use a lid when using Sauté.
Touch Cancel. Check that all seals are clean, positioned
correctly, and undamaged. Make sure that you have at
least 1 cup of water in the cooking pot before restarting.
Do not pressure can at altitudes above 2000 m (6600 ft).
Starch deposits at the bottom of the cooking pot may have
blocked heat dissipation.
Turn the multicooker off, release pressure and inspect the
bottom of the cooking pot.
Touch Cancel and Quick Release pressure.
Try this