Advertisement
D) Select the number of Side Marker (L810 or RTO) Tiers that are connected to
the system. 0 through 4 can be selected; the number input shall represent the
number of tiers present. Press "ENTR".
E) Select the number of Side Marker s (L810's, RTO's) that will connected to P1
(Tier 1) 0 through 4 can be selected, then press "ENTR"
NOTE: Repeat for ports 2 through 4.
NOTE: Each port represents one tier.
F) Select the number of beacons (864/5's) that will be connected to the system. 1
through 9 beacons can be supported. Press "ENTR"
G) Select the number of side light boards that are connected to the system, 1
through 9 and the press "ENTR".
NOTE: Additional sidelight monitor boards are available for special applications;
most configurations will only have one board and this will remain set to "1"
Num of 810 TIERS=0
u/d=chg, enter=done
NUM 810 P1/T1= 0
u/d=chg, enter=done
Number of 864/5 = 1
u/d=chg, enter=done
Number of SD BDs=1
u/d=chg, enter=done
1501 Route 34 South, Farmingdale, NJ 07727 Tel: (732)
919-3119 Fax: (732) 751-5778 www.dialight.com
Document No: 9100-127-1958-99 Rev F
Advertisement
