Download Print this page
Front Runner FATT002 Quick Start Manual

Front Runner FATT002 Quick Start Manual

Foot rail for toyota tacoma (2005- current)

Advertisement

Quick Links

START HERE!
Don't be a hero and muscle through this without first reading these fitting instructions! Improper installation of this gear may void certain aspects of
your warranty.
Before you begin, take a moment and open all your Front Runner rack kit boxes and gather the assembly instructions for the various components.
A complete kit will contain:
1. A Front Runner Mounting System specific to your vehicle
2. A Front Runner Rack Tray or Load Bar Slats
This document will guide you through the assembly of the mounting system and assist you in fitting the roof rack tray or load bars to your specific
vehicle.
Please refer to the next page for a list of all the components, quantities and tools required.
IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD
RESULT IN AN AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT
RUNNER PRODUCTS TO YOUR VEHICLE. CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND
DAMAGE. THEREFORE YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO
INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY
FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.
FATT002_REV_A01
Foot Rail
toyota TaCOMA (2005- CURRENT)
READ ME FIRST
IMPORTANT WARNING!
1
© COPYRIGHT 2016 FRONT RUNNER VEHICLE OUTFITTERS
ENG
FATT002
220 min

Advertisement

loading

Summary of Contents for Front Runner FATT002

  • Page 1 Don’t be a hero and muscle through this without first reading these fitting instructions! Improper installation of this gear may void certain aspects of your warranty. Before you begin, take a moment and open all your Front Runner rack kit boxes and gather the assembly instructions for the various components. A complete kit will contain: 1.
  • Page 2: Tools Needed

    GET ORGANIZED Here is what you are looking at for FATT002 IN THE BOX IN THE BOX IN THE BOX TOOLS NEEDED Foot Rail; 1xLH, 1xRH 10 X Nut Cap M6 10mm 10 X Hex Bolt M6x35 13mm 10 X...
  • Page 3 Step 2.1 as shown in 2.2. Using a pair of side cutters and a utility knife, remove the marked section of ditch molding as shown in Step 2.2 through to Step 2.4. Refer to step 2.2. 13mm FATT002_REV_A01 © COPYRIGHT 2016 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 4 (item 11) must be used on the front and rear mounting points on either side of the vehicle. Refit the ditch molding, lining up the holes in the ditch molding with the aluminium spacers. 13mm FATT002_REV_A01 © COPYRIGHT 2016 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 5 3.3. Loosely fit the rack to the foot rail by using items 7, 8 and 9. 13mm 13mm Centre the rack and fully tighten . Use M8 nut caps (Items 10) to finish off the nuts. FATT002_REV_A01 © COPYRIGHT 2016 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 6 Congratulations. You did it. Take a step back and admire your work! INSTALL OTHER VEHICLE AND RACK ACCESSORIES Now's the time to visit your favorite Front Runner Dealer in person or online. FATT002_REV_A01 © COPYRIGHT 2016 FRONT RUNNER VEHICLE OUTFITTERS...