d. Using a 10mm drill bit, drill four holes in the marked locations and push the
Wall Plugs inside.
e. Position the Brackets over the holes and fix in place using the Washers and
Wall Screws.
6. The radiator is now ready to mount. Lift the radiator onto the Brackets as in
Figure 7.
7. Now, the Safety Hooks can be secured.
a. Close the Safety Hook over the radiator collector bar (see Figure 8).
b. Insert the second Locking Screw into the front hole of the bracket.
c. Tighten both screws.
3-4 | Connecting the element
Wiring the heating element to the mains is a job for a qualified electrician. Please
consult the element manual for full instructions and safety warnings, paying special
consideration to the following:
• The radiator and its element are designed to be used under AC 230
voltage and should be connected to the household fixed wiring by a
qualified electrician in accordance with national wiring regulations. Risk
of electric shock.
• Do not install the radiator under or in front of a power socket or connector box.
Ecostrad_Allora_V_V1.1.4_12102022
Figure 7 | Lift radiator onto wall
Figure 8 | Securing Safety Hook
9