Table of Contents
Advertisement
WARRANTY
Daikin warranties that the unit has no material or processing defects at the time of manufacturing. The warranty covers a period of 12
months from delivery, except for consumables (filters, UV lamp etc).
At the moment of the delivery, the unit must be scrupulously examined to ascertain that it conforms to the data of the packing list and that
the shipment is complete and corresponds to the order. Check carefully that no damages have occurred. Any damages must be
immediately reported to the carrier, raising the opportune reserves. The plate indicating the general features must be checked before
unloading to discover any discordance. Daikin will not recognize damages reported after acceptance of the delivery.
Complaints for defects that could not be detected at the moment of delivery must be reported to Daikin Middle East & Africa FZE in writing
and forwarded by registered post. Otherwise, they shall not be taken into consideration.
If Daikin recognizes the existence of a defect, it undertakes to replace the defective parts, with the express exclusion of any other claim pro-
posed by the customer.
The warranty does not cover problems deriving from/created by the connections to electricity or compressed air systems or other external
facilities connected to the unit.
Defects due to the following are also excluded from the guarantee:
Incorrect operating and failure to observe the maintenance provisions.
Normal wear and tear
The warranty shall be null and void if the unit is incorrectly used or used above the performance limits for which it has been designed. In
the event of any modification of, or tampering with the unit, especially the safety devices, the warranty shall be immediately null and void
and the manufacturer shall be relieved of any responsibility whatsoever. No compensation for damages will be recognized for
disruption of business activities due to the system being stopped during the execution of maintenance or repairs, whether performed
under warranty or for a charge.
Daikin declines all liability, present and future, for damages to persons, property or the machine itself, deriving from negligence on
the part of the operators, failure to respect the installation, use and maintenance instructions given in this manual, or failure to comply with
the safety rulings in force for the protection of the system and of the qualified personnel appointed to use and maintain the same. The
serial number, indicated on the unit, is the primary reference for the identification of the product and for any requirements, whatsoever.
ENVIRONMENTAL CONDITIONS
The unit has been designed for use in indoor applications. However, the unit cannot operate in environments where explosives
are present, where there is a high presence of dust, where there is a high percentage of humidity or high temperatures, unless
manufactured explicitly by request for such environments.
ENVIRONMENTAL CONTAMINATION
The unit has been designed to operate without problems in the most varied types of environment and sectors. Depending on the operating
sector of installation, and the sector of use, the specific rulings must be complied with, and all necessary company procedures must be
implemented to avoid problems of an environmental type (a system which operates in a hospital may present different problems that
a system operating in other sectors, from the point of view of the disposal of consumption parts, filters, etc. For example, the
former could present bacteriological-type problems.) The customer is responsible for instructing and training workers in the procedures
and behavior to be adopted.
NOISE
The unit has been designed and constructed in such a way as to prevent risks due to the emission of aerial noise exceeding the lower limit of
80 dB(A). It must be noted that every environment has its own acoustic features, which may have considerable influence on the sound
pressure issued by the unit when functioning. Therefore, it is necessary to consider the noise data supplied as a reference base, while the
buyer-user is responsible for carrying out specific photometric tests in the place of installation and under the real usage conditions of the
unit.
DISPOSAL AND DEMOLITION
For the disposal of packaging, user or installer must comply with the laws and regulations in force.
When the unit is being put out of service, or for the demolition and disposal of the unit, or of any
single part of the same, the buyer-user must comply with the laws and regulations of his/her own country.
DAFU-IOM—01
Page 7 of 15
Advertisement
Table of Contents
