Create Room DreamBox Manual page 33

4
Two people are needed for this step.
Lift up RS2 slightly to slide the Back Panel
into the grooves of RS1 and RS2. Slide
Back Panetoward Lid until secure.
Place RS2 on top of Lid and Pocket
5
and fit over Connecting Bolts with
Locking Cams. Tighten 2 Locking Cams
on Lid and 2 Locking Cams on Pocket.
Proprietary, patented product and assembly instructions. Do not copy or distribute.
in each divider. in each divider.
Use ONLY a MANUAL phil
screw driver.
Install (2) angle brackets
using (8) #5 14mm washe
screws.
Use ONLY a MANUAL Use ONLY a MANUAL
screw driver. screw driver.
Install (2) angle brac Install (2) angle brac
using (8) #5 14mm w using (8) #5 14mm w
screws. screws.
Proprietary, patented pr
Proprietary, patent Proprietary, patent
29