Advertisement
phillips
phillips
Attach RS Lid to RS1. Insert Phillips
2
head screwdriver at a slight angle into
installed Locking Cams. Turn clockwise
until tight (about 220 degrees).
3
Slide Pocket over Connecting Bolts into
RS1. Make sure the open side is facing
the lid and unfinished edge is facing the
groove for the back panel. Tighen two
Locking Cams.
Proprietary, patented product and assembly instructions. Do not copy or distribute.
7
28
Advertisement
Need help?
Do you have a question about the DreamBox and is the answer not in the manual?