Intelligent Dosing System - Siemens WM16XK75NL User Manual

Table of Contents

Advertisement

NLIntelligent dosing system
In order not to cancel the current
program, the program selector
must be set to the initial program.
agoes out in the display

15 Intelligent dosing system

teem
Depending on the program and the
settings, the optimum amounts of
liquid detergent and fabric softener
are dosed automatically.
15.1 Program with intelligent
dosing system
start
If you do not want to manually dose
liquid detergent and fabric softener,
use the intelligent dosing system. This
function is available depending on the
program set and is activated
automatically.
Remark
If you use the intelligent dosing
system, do not add additional
detergent or fabric softener to the
manual dosing dispenser.
→ "Dosing detergent and care agent",
Page 34
If you want to dose manually for a set
program, please observe the
following instructions: sDeactivate the
intelligent dosing
system before starting the
program. The settings are saved
even after the device is switched
off.
→ "Buttons", Page 25
36
.
sFill the detergent or detergent
softer in the manual dosing
dispenser.
→ "Dosing detergent and care
agent", Page 34 sActivate the
intelligent dosing system
tem after the program end.
→ "Buttons", Page 25
Requirements
sThe laundry is prepared.
→ "Preparing the laundry",
Page 32
sThe laundry is sorted. sThe
laundry has been placed.
→ "Filling the drum with laundry",
Page 34
sThe program is set.
→ "Set program", page 33
sThe intelligent dosing system is
activated.
→ "Buttons", Page 25
→ "Display", page 23
→ "Display", page 23
Fill the dosing containers.
1.
"Filling the dosing
container", page 37
To replace the contents of the
dosing containers with another
product, clean the detergent
drawer.
→ "Cleaning the detergent
drawer", Page 40
If desired, the contents of the
2.
dosing containers → Page 37 To
adjust.
If desired, the basic dosing amount
3.
→ Page 38 To adjust.
If desired, adjust the program
4.
settings.
→ "Adjust program settings", page
33
Start the program.
5.
→ "Starting the program", Page
34

Advertisement

Table of Contents
loading

Table of Contents