Table of Contents
Advertisement
NLCleaning and maintenance
16.2 Changing basic settings
Set the program selector to
1.
position 1.
PressCentrifugeand at the same
2.
time turn the program selector to
position 2.
aThe display shows the current value
the on.
Set the program selector to the
3.
desired position.
Press - / + to change the value.
4.
Turn off the device to save the
5.
change.
17 Cleaning and care
loves
Carefully clean and maintain your
appliance to ensure that it continues to
work properly for a long time.
Remark:More information can be
found in the digital operating
instructions by scanning the QR code
in the table of contents or at
siemenshome.bsh-group.com .
40
17.1 Cleaning the drum
CAREFULLY
Risk of injury!
Permanent washing at low
temperatures and lack of ventilation
of the appliance can damage the
drum and cause injuries.
Regularly run a drum cleaning
▶
program or wash at a
temperature of at least 60°C.
Leave the appliance to dry with the
▶
door and detergent drawer open
after each use.
The programCleaning the drum
▶
without laundry with powder
detergent.
17.2 Cleaning the detergent
drawer
If you want to replace liquid detergent
or fabric softener in the dispenser
with another product or if the
detergent drawer is dirty, clean the
detergent drawer.
PAY ATTENTION!
The pump unit contains electrical
components. Electrical components
can be damaged by contact with
water.
▶
Do not clean the pump unit in the
dishwasher or immerse it in water.
Protect the electrical connections
▶
on the back from moisture,
detergent and fabric softener
residues.
Turn off the device.
1.
→ "Switch off the device",
page 35
Pull out the detergent drawer.
2.
Advertisement
Table of Contents
