NLTroubleshooting
Malfunction
burns.
flashes.
All other error codes.
"E:30/-20"
48
Cause and Troubleshooting
Place the pump unit in the detergent drawer.
1.
→ "Cleaning the detergent drawer", Page
40
Slide in the detergent drawer until the symbol goes out.
2.
Detergent dosage is too high.
Immediate measure: mix a tablespoon of fabric
▶
softener with 0.5 l of water and pour this mixture into
the manual dosing compartment (not for outdoor,
sportswear and down textiles).
When the intelligent dosing is activated, reduce the
▶
basic dosing amount
→ Page 38 .
When dosing manually, reduce the amount of
▶
detergent for the next wash with an equal load.
Temperature is too high.
Wait for the temperature to drop.
▶
→ "program cancel", Page 35
▶
Water level is too high.
Select a suitable program for draining.
▶
→ "Programs", Page 28
Door is not closed.
Close the door.
1.
To start the program, press to fill
2.
.
Laundry is wedged in the door.
Open the door again.
1.
Remove trapped laundry.
2.
Close the door.
3.
To start the program, press to fill
4.
.
Malfunction
Please contact customer service.
▶
→
"Customer Service", page 59
Solenoid valve defective.
Please contact customer service.
▶
→
"Customer Service", page 59
Detergent dosage is too high.
When dosing manually, reduce the amount of
▶
detergent for the next wash with an equal load.
Start/Additional
Start/Additional