Parameters - Siemens SIMATIC ET 200S Manual

Parameters

2.1 Parameters
Table 2-1 Parameters for analog input module
2AI I 4WIRE HS
Group diagnostics (parameter
assignment error, internal error)
Diagnostics: Overflow/underflow
Diagnostics: Wire break*
Smoothing
Hardware interrupt enable
Type/range of measurement
High limit
Low limit
* in the measuring range 4 to 20 mA only
Note
If you deactivate a channel of the electronic module, you do not gain any advantages in
terms of speed due to the measuring procedure.
2AI I 4WIRE HS analog electronic module (6ES7134-4GB62-0AB0)
Manual, 01/2008, A5E01076124-02
Range of values
Disable
•
Enable
•
Disable
•
Enable
•
Disable
•
Enable
•
None
•
Weak
•
Medium
•
Strong
•
Disable
•
Enable
•
Deactivated
•
4 to 20 mA
•
0 mA to 20 mA
•
± 20 mA
•
low to high limit of the
•
overrange
Low to high limit of the
•
nominal range
Default setting
Disable
Disable
Disable
None
Disable
4 to 20 mA
Depending on the
measuring range
Depending on the
measuring range
2
Applicability
Module
Module
Channel
Channel
Module
Channel
Channel
Channel
13