Siemens SIMATIC ET 200S Manual page 11

Distributed i/o 2ai i 4wire hs analog electronic module

Hide thumbs Also See for SIMATIC ET 200S:

Table of Contents

Firmware update

To add functions and for troubleshooting, it is possible to load firmware updates to the

operating system memory of the electronic module using STEP 7 HW Config.

Note

When you launch the firmware update, the old firmware is deleted. If the firmware update is

interrupted or canceled, the electronic module will no longer be capable of functioning.

Restart the firmware update and wait until it has completed successfully.

Note

If the ET 200S is operated in conjunction with an S7-300 CPU with PROFIBUS DP interface

or an ET 200S Interface Module IM151-3 PN HIGH SPEED, a station failure of the ET 200S

can occur during the firmware update.

I&M functions and firmware update

The interface modules identified in the table below (as of order number) can be used to read

and write I&M data from the module and for the firmware update.

Interface module

IM151-1 HIGH FEATURE

IM151-3 PN

IM151-3 PN HIGH FEATURE

IM151-3 PN FO

IM151-7 CPU

2AI I 4WIRE HS analog electronic module (6ES7134-4GB62-0AB0)

Manual, 01/2008, A5E01076124-02

1.1 2AI I 4WIRE HS analog electronic module (6ES7134-4GB62-0AB0)

as of order number

6ES7151-1BA02-0AB0

6ES7151-3AA22-0AB0

6ES7151-3BA22-0AB0

6ES7151-3BB22-0AB0

6ES7151-7AA20-0AB0

Properties

Table of Contents