Table of Contents
Advertisement
Functional characteristics
Power-saving mode (Standby)
5.6
Power-saving mode (Standby)
You can activate the power-saving mode by either pressing the push-button > see 4 chapter for a pro-
longed time or by setting a parameter in the machine configuration menu (time-controlled power-saving
mode
) > see 5.5 chapter.
When power-saving mode is activated, the machine displays show the horizontal digit in the
centre of the display only.
Pressing any operating element (e.g. turning a rotary knob) deactivates power-saving mode and the ma-
chine is ready for welding again.
36
099-M183xA-EW501
15.7.2022
Advertisement
Table of Contents
Need help?
Do you have a question about the M1.83-A-1 and is the answer not in the manual?
Questions and answers