Advertisement

H3C LSWM12H2Q interface card user
▌Introduction
Overview
The LSWM12H2Q interface card provides two QSFP28 ports and two
QSFP+ ports.
Figure 1 Front panel
(1) QSFP+ port LED
(3) QSFP28 port
QSFP+ ports
You can install the following transceiver modules and cables in the
QSFP+ ports on the card:
QSFP+ transceiver modules in
QSFP+ DAC cables in
QSFP+ to SFP+ DAC cables in
QSFP+ AOC cables in
Table 1 QSFP+ transceiver modules available for the QSFP+
ports (1)
QSFP+ transceiver module
QSFP-40G-SR4-MM850
manual-6PW102
Table
3.
Table
5.
Central
wavelength (nm)
850
1
(2) QSFP28 port LED
(4) QSFP+ port
Table 1
and
Table
Table
4.
2.
Connector
MPO

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LSWM12H2Q and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for H3C LSWM12H2Q

  • Page 1 H3C LSWM12H2Q interface card user manual-6PW102 ▌Introduction Overview The LSWM12H2Q interface card provides two QSFP28 ports and two QSFP+ ports. Figure 1 Front panel (1) QSFP+ port LED (2) QSFP28 port LED (3) QSFP28 port (4) QSFP+ port QSFP+ ports...
  • Page 2 Central QSFP+ transceiver module Connector wavelength (nm) QSFP-40G-CSR4-MM850 Four lanes: • 1271 • QSFP-40G-LR4-WDM1300 1291 • 1311 • 1331 Four lanes: • 1271 • QSFP-40G-LR4L-WDM1300 1291 • 1311 • 1331 Table 2 QSFP+ transceiver modules available for the QSFP+ ports (2) QSFP+ Cable/fiber Modal...
  • Page 3 As a best practice, use H3C QSFP+ transceiver modules, QSFP+ DAC cables, QSFP+ to SFP+ DAC cables, and QSFP+ AOC cables for the QSFP+ ports on the LSWM12H2Q interface card. The H3C QSFP+ transceiver modules and QSFP+ cables available for the card are subject to change over time. For the...
  • Page 4 QSFP28 ports You can install the following transceiver modules and cables in the QSFP28 ports on the card: • QSFP+ transceiver modules in Table 1 Table • QSFP+ DAC cables in Table • QSFP+ AOC cables in Table • QSFP28 transceiver modules in Table 6 Table •...
  • Page 5 100 Gbps QSFP-100G-D-CAB-3M 3 m (9.84 ft) NOTE: As a best practice, use H3C QSFP+/QSFP28 transceiver modules and QSFP+/QSFP28 DAC cables for the QSFP28 ports on the LSWM12H2Q interface card. The H3C QSFP+/QSFP28 transceiver modules and QSFP+/QSFP28 DAC cables available for the card are subject to change over time.
  • Page 6 LED status Description No transceiver module is installed in the port, or no link is present on the port. Table 10 QSFP+ port LED description LED status Description A transceiver module is installed in the port. The Steady green port is operating at 40 Gbps, and a link is present on the port.
  • Page 7: Installing The Card

    3, insert the card slowly into the slot along the guide rails. 5. Rotate inward the ejector lever as shown by callout 2 in Figure 3 until the latch locks the ejector lever in place. Figure 3 Installing the LSWM12H2Q interface card...
  • Page 8: Removing The Card

    Installing and removing QSFP28/QSFP+ transceiver modules and cables For information about installing and removing QSFP28/QSFP+ transceiver modules and cables, see H3C Transceiver Modules and Network Cables Installation Guide at www.h3c.com. Verifying the installation After the installation is complete, determine whether the card is operating correctly.
  • Page 9: Technical Support

    ▌Technical support New H3C Technologies Co., Ltd. provides customers with comprehensive technical support and service. If you purchase the products from the sales agent of New H3C Technologies Co., Ltd., please contact our sales agent or technical personnel. Website: http://www.h3c.com...

Table of Contents