Connecting The Camera; Power Supply - Canon VB-H47 Installation Manual

Connecting the Camera

Power Supply

Please be sure to read the user manual for the dedicated power supply before use.
The camera does not have a power switch. Connecting and disconnecting the LAN
cable (PoE power supply), AC adapter, or external power supply plug turns the power
ON and OFF, respectively.
When the camera needs to be rebooted, perform the reboot operation from the camera
setting page (please refer to the "Operation Guide").
■
PoE (Power over Ethernet)
For details, refer to "Other" > "Power Supply" (P. 19).
For PoE powered devices, check with a Canon's sales representative.
Some PoE devices allow power limits for each port, but applying limits may interfere
with performance. In this case, use without any restrictions.
Some PoE devices have total consumption power limits for ports, which can interfere
with performance when multiple ports are in use. For more information, check the
instruction guide of the PoE device.
The camera can also be connected to an AC adapter (sold separately) while receiving
power from a PoE power fed device. In such cases, the PoE power supply is given priority,
and the camera does not use the power supply from the AC adapter (sold separately).
When the PoE power supply is disconnected, power is supplied automatically from the
AC adapter (sold separately).
11